Features:
1. 2.8" TFT screen
2. Infrared resolution: 256 x 192
3. Frame rate: 25Hz
4. Temperature measurement range: 30℃~45℃
5. Accuracy: ±0.5℃
6. Photograph function with SD card storage
7. PC software analysis
9. Real-time image transmission
10. Visual camera (640×480)
11. Type-C USB interface
12. 1/4" tripod mounting hole

*High-temperature limit exceeding alarm
The customized high temperature limit can be set to 37.3℃. For the temperature ≥37.3℃, indicator light and screen will indicate high temperature alarm, which can effectively and quickly screen individuals with abnormal temperature.

Real-time image transmission
Set the USB mode to USB camera, connect the USB cable to the computer to mirror the computer software by real-time image transmission. More

Introduction
Congratulations on purchasing our professional non-contact infrared thermometer. This product is a professional, hand-held meter for non-contact Infrared temperature measurement that is simple to use, highly accurate, and has a wide temperature range.It can be used to measure the surface temperature of hard-to-reach or moving objects.
Features
Accurate and fast non-contact measurements;Circular laser pointers increase the target accuracy▪MAX-MIN-AT- HAL-LALmode;Temperature alarm ▪ Large color LCD display with backlight;°C / °F selection ▪ Low power indication;Data hold ▪ Auto power off.
Safety
Use with extreme caution when the laser beam is turned on.
Do not point the beam towards eye of anyone or any animals.
Do not allow the beam to strike the eye from a reflective surface.
Do not use the laser near explosive gases.
Distance & Spot Size
When the distance (D) between the thermometer and the object increases, the light spot (S) increases. The distance to the spot ratios are shown below in the field of view diagram.
Notes:
Accuracy can be ensured while the temperature is at 18℃ to 28℃ (64℉~82℉) and humidity is less than 80 % RH.
Make sure the target is larger than the unit’s spot size. The smaller the target, the closer you should be to it. When accuracy is critical, make sure the target is at least twice as large as the spot size.

More

1. Vertical Resolution ：12bit

2.Max. waveform capture rate ：230,000wfms/s

3. Input Impedance ：50Ω / 1MΩ

4. Power supply ：DC 24V

5. Dimensions ：224.5*30*264.3mm（Width*Height*Depth）

More

1. Real-time sampling rate ：3GSa/s

2.Memory Depth ：360Mpts

3. Max. waveform capture rate ：230,000wfms/s

4. Dimension ：400*280*35.8mm

More

1. Analog channels ：8

2.Input impedance ：50Ω / 1MΩ

3. Memory Depth ：1800Mpts

4. Vertical Resolution ：12bit

More

1. Accuracy (Typical) ： ±2% (Customizable 1% accuracy)

2. Bandwidth ： 100MHz

3. CMRR ： DC：>80dB 100kHz: >60dB 10MHz: >30dB 100MHz: >26dB
 

More

1. Bandwidth ： 200MHz

2. 200MHz ： 4

3. Real-time sampling rate ：1GSa/s

4. Vertical Resolution ： 8bit

5. Input Impedance  ： 1MΩ±1% || 14pF

6. Power supply ： DC 12V

7. Support Test ： Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN L/H, LIN, Flexray, K line),
Combination Tests

8. Battery ( Optional ) ： 7.4V、7500mAh Lithium-ion battery

9. DC Gain Accuracy ： ≤ 2%

More

1. Max. waveform capture rate ： 130,000 wfms/s

2. Vertical Resolution ： 8bit

3. Support Test ： Charging/Start Circuits, Sensors, Actuators, Ignition,
Networks (CAN L/H, CAN FD, LIN, Flexray, K line),Combination Tests

4. Bandwidth Filter ： Full bandwidth, Low pass

5. Interfaces ： Wi-Fi、USB 3.0/2.0 Host、USB Type-C、HDMI、Trigger out

6. Display ： 8" TFT LCD capacitive touch screen, 800*600 pixels, 14*10 grids

7. Dimension / Net Weight ： 265*192*50mm/1.9kg (with battery)

More

1. Real-time sampling rate : 2GSa/s、1GSa/s

2.Input sensitivity range : 300,000 wfms/s、78,000 wfms/s

3.Vertical Resolution ： 8bit

4.Support Test ： Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN L/H, CAN FD, LIN, Flexray, K line), Combination Tests

5.Bus decoding ： RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C

6.Interfaces ： Wi-Fi, USB 3.0/2.0 Host, USB Type-C, Grounding, HDMI, Trigger out

7. Display ： 10.1 Inch LCD capacitive touch display，1280*800 resolution，11*10 grids

8.Battery ： 7.4V ,7500mAh Li-Ion battery

9.Dimension / Net Weight ： 265*192*50mm / 1.9kg（with battery）

More

1.Memory Depth : 110Mpts

2.Analog channels : 4
 
3.Dimension ：265*174*31mm(Width x Height x Thickness)

4.Real-time sampling rate ：1GSa/s

5.MHO14 Series : Micsig MHO14-100/MHO14-200

6.6.Accessory information: 
(1).Passive probe * 4, power cord * 1, power adapter * 1, user quick guide * 1
(2).Passive probe * 4, power cord * 1, power adapter * 1, user quick guide * 1,dedicated carrying case * 1（Single package of goods: 43 * 35 * 16cm battery built-in in oscilloscope, other accessories in accessory box）
(3).Passive probe * 4, power cord * 1, power adapter * 1, user quick guide * 1,dedicated handbag * 1

7.Vertical Resolution : 12bit

More

1.Analog channels : 4

2.Memory Depth : 110Mpts
 
3.Battery : 3.7 V,16000mAh Lithium-ion battery

4.Display : 8" TFT LCD capacitive touch screen, 1280*800 pixels

5.MHO14 Series : Micsig MHO14-100N/MHO14-200N

6.Accessory information: 
(1).Passive probe * 4, power cord * 1, power adapter * 1, user quick guide * 1
(2).Passive probe * 4, power cord * 1, power adapter * 1, user quick guide * 1,dedicated carrying case * 1（Single package of goods: 43 * 35 * 16cm battery built-in in oscilloscope, other accessories in accessory box）
(3).Passive probe * 4, power cord * 1, power adapter * 1, user quick guide * 1,dedicated handbag * 1

More

1.Unparalleled Operating Experience

2.Remote Control

3.Serial Bus Decoding

4.Channel Label
5.Integrated Control Panel

6.Bandwidth Filter

7.Color Temperature
8.Android Operation System

9.31 Auto Measurements More